DGK Pellachrom | decorative and marine paints | - Header Section

DGK Pellachrom | decorative and marine paints | - Main Section

DGK Pellachrom | decorative and marine paints | - Main Component

water
WATERBASED
  • 750 ml
  • 3 L
  • 10 L

DECONYL ECO

Header

premium ecological emulsion paint for interior use

DECONYL ECO is an ecological emulsion paint for interior use, certified by the Hellenic Supreme Council for the Award of the Eco-label (ASAOS) according to the criteria of the EU Eco-labelling Board. During application, the product is odorless. It does not contain ammonia or other dangerous substances as aromatic hydrocarbons, heavy metals or free formaldehyde. This easy-to-apply paint offers a great coverage power, an excellent performance, a high unaltered whiteness and brightness. Apply on new or painted surfaces after preparation, like walls, gypsum, plaster or wood. Creates a uniform mat finish with a great resistance to frequent washing and hard weather conditions. Ideal for painting children’s rooms, schools & hospitals.

  • high performance
  • high coverage
  • excellent uniform matt finish
1
BUILDINGS – INTERIOR USE
matt
Finish
toolsall
TOOLS
DECONYL ECO
THINNING
1-2 hr
DRYING TIME
2-4 hrs
OVERCOATING INTERVAL
1- 2
RECOMMENDED COATS
12 sin plin 2
m2/L
SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Surface must be clean, dry and free from loose or flaking material, dust, oils and salting.

Surfaces on sound condition:
Apply 2 coats of DECONYL ECO.
New plaster, concrete, brick, cement:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL ECO.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL ECO.
New gypsum board or putty:
• Prime with FERM (H2O) or Α-500 PRIMER. Apply 2 coats of DECONYL ECO.
• Prime with AQUAFERM. Apply 1-2 coats of DECONYL ECO.
Old water-based or lime paints:
Prime with FERM (H2O) thinned up to 50% with water. Apply 2 coats of DECONYL ECO.

Use

Roller, brush or spray airless. Thin by 10-20% with water.

► Stir well before use and during application.
► Allow newly poured concrete to cure for 30 days, then prime with FERM (H2O) before painting with DECONYL ECO.

Drying out - coverage

Drying times are dependent on ambient temperature and film thickness.

Touch dry: 1-2 hours.

Recoat: 2-4 hours.

Practical coverage: 9-13m²/lt depending on the thickness of each coat and the surface porosity.

DGK Pellachrom | decorative and marine paints | - Bottom info

Calculate the quantity of the paint

you need for